Hardness Tester

Product Details:

Shore Hardness Tester is a measure of the resistance of a material to the penetration of a needle under a defined spring force. It is determined as a number from 0 to 100 on the scales A or D. The higher the number, the higher the hardness. The letter A is used for flexible types and the letter D for rigid types.

Product Details:

Analog Shore Hardness Tester, Shore A and Shore D available

Product Details:

Description:

• VERTEX' Computerised Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation. The Indentation can be measured by Auto measure option given in Software there are four options to measure indentation No. 
• Remote Auto 
• Auto 
• Semi Auto 
• Manual measurement 

• Manufacuring standard conforms to IS : 1754, ISO 6507-2 & ASTM E92

Features:

• Fully computerised Vickers Hardness Measurement by most accurate software
• Wide Testing Range from softest to hardest materials
• High accuracy and repeatability of measurement at all loads
• Motorised Loading and Unloading cycle with dwell time settable upto 99 sec
• Small Test Loads to measure thin sheet metals and small components
• User friendly software for Hardness measurement
• Advanced image processing software with precise calculation of Vickers hardness numbers 
• Fastest "AUTO Measure" feature in software to eliminate manual errors.

Product Details:

• Poldi impact hardness tester is useful for simple and quick determination of Brinell hardness ofmetals such as steel, Cast Iron, Brass, Aluminium, Copper etc. Due to easy handling and manoeuverability, thistester is most suitable for testing heavy castings and other components.
• Principle Load is applied to the specimen and a standard test bar in a linear direction through a special Brinell Ball of 10mm dia. by a hammer blow With the impact load being consistent, the extent of indentations obtained on thespecimen and the test bar depend on their hardness, harder material gives less depth of indentation. The twodiameters of indentations are measured by a special “Magnifiscope" measuring magnifier supplied with the tester.
• By referring to the table provided, the hardness of the specimen can be determined.

Technical Data

• BrinellBall:10 mm dia. 
• Fixed in a special holder with a spring loaded plunger.
• Standard Test Bar:Each bar individually calibrated with multiplying factor markings.
• Measuring magnifier Measuring range : 10 mm - Scale graduations : 0.1 mm - Magnification : -10 x 
• Accuracy of Measurement : 0.05 

Product Details:

_{Main function and features:}

•  Equippe d with digital eyepiece and Data computing systems which accuracy can reach to 0.01um; Just click one button the hardness value will display on screen directly.
• Main components adopted American 3M, Allegro, and Japanese Omron NKK brand, ensure the instrument can stable working for a very long time.
• The optical system designed by our senior optical engineer not only meet the definition of hardness testing requirements, but also can observe the micro structure of the material, image is very clear.
• The optical system designed by our senior optical engineer not only meet the definition of hardness testing requirements, but also can observe the micro structure of the material, image is very clear.
• According to different visual habits of the operators, the strength of the light source can be adjusted. To avoid the visual fatigue for long time operation.
•  With Vickers hardness and Knoop hardness testing capabilities, and testing force can be extended to 2KG (HV2). Automatic measuring the indentation diagonal length, the hardness and conversion hardness will show on the screen directly, no need to check hardness table.
•  _{Industrial digital screen can direct display hardness value, conversion hardness, testing meth od, testing force, dwell time, test number and testing process; The built in printer can print testing times, hardness value,average value, Max. Value, Min. Value, Xmax Xmin directly, easy for operator to save the data.}
• _{One time casting aluminum molding shell ensure structure more stable; Adopted car painting technology, pure white color looking more decent; High scratch resistance capability, used for years still brightness like new.8. Reserved image channel, can be connected with computer, used the image analysis software to analyzingthe physical and chemical properties of the material (for optional purchase).}
•  Factory directly supply, we have products develop &design & produce ability, all the parts provide life time replacement and maintenance service.

Product Details:

Details:

• This simple-to-use and inexpensive tester can be used across the entire Brinell range (HB100 to HB700). The Pin Holder applies force to the indenter by the operator using a hammer or a clamping device. The force applied is controlled using a calibrated shear pin. When the load is applied and the force applied reaches the shear pin’s shear limit, the shear pin breaks. The diameter of the resulting indentation can then be read on a Brinell Microscope & Hardness value can be obtained by referring chart provided with the tester.

Product Details:

Description:

• Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately. Large screen LCD, showing all functions and parameters. With EL background light.
• Seven impact devices are available for special application. Automatically identify the type of impact devices, and with the user calibration function. Test at any angle, even upsid down,Large memory could store 100 groups (Relative to average times 32???1) informaon including measure value, mean value, impact direction, impact times, material and hardness scale etc.
• Battery information showing the rest capacity of the battery and the charge status. Original imported high speed thermal printer support the immediate printing function. It can save data permanently. NI-MH rechargeable battery as the power source. Charge circuit integrated inside the instrument. Continuous working period of not less than 150 hours (EL off and no printing). Auto power off to save energy. Excellent after-sale service system for high quality products-One year warranty. Easy to buy and comfortable to use.

Advantages:

• It is the highest brightness display in Indiashowing all functions and parameters, easy to read OLEDscreensave lot of energy gives longer battery life.
• Two hardness scale dual-displayin the screen.
• Measuring direction in 360° and add the auto measuredirection to make test easy and precise.
• Add four new hardness scales, HRA, HB for D impact device of alloy tool steel; HV for cast aluminum alloy
• Add new user material function, to meet the need of user can testthe special material. Test at any angle, even upside down.
• Wide measuring range. It can measure the hardness of all metallic materials. Direct display of hardness scales HRB, HRC, HV, HB, HS, HL and three types of strength values immediately.
• Seven optional impact devices are available for special application. Automatically identify the type of impact devices.
• Large capacity memory could store 600 groups (Relative to average times32???1 ) information including single measured value, mean value, testing data, impact direction, impact times, material and hardness scale etc.
• Upper and lower limit can be preset. It will alarm automatically when the result value exceeding the limit.
• Battery information indicates the rest capacity of the battery and the charge status.
• User calibration function.
• USB port with the PC connectivity,multi-functions data proceeding software.
• Original imported high speed thermal printer support the immediate printing function. It can save data permanently.
• Lirechargeable  battery  as  the  power  source.  Charge  circuit  integrated  inside  the  instrument. Continuous working period of no less than 200 hours (EL off and no printing).
• Auto power off to save energy.
• Excellent after-sale service system for high quality products, 1 year warranty

Main Application:

• Die cavity of molds
• Bearings and other parts
• Failure analysis of pressure vessel, steam generator andother equipment
• Heavy work piece
• The installed machinery and permanently assembled parts
• Testing surface of a small hollow space
• Material identification in the warehouse of metallic materials
• Rapid testing in large range and multi-measuring areas for large-scale work piece

Product Details:

Description:

• Vickers/Vickers cum Brinell hardness testers are suitable for testing very wide range of materials. From very soft material such as lead upto hard material like hardened steel, as well as thin metal strips & case hardened jobs can be tested since the load applied is very small.

• Though these machines are easy to operate it is highly precise. A push button system is provided for the selection of loads. Loading cycle and penetration of the indentor in the job starts after pressing the push button. Unloading is accomplished through handle and diagonal/diameter of impression directly appears on the screen.
• A built in optical system with graduated readout with Micrometer helps the operator to measure the impression directly from the projection screen. This machine confirms to IS-1754-1986 for vickers and IS-2281-1983, BS-240 for Brinell Test.

Features:

• Vertex make Vickers / Vickers cum Brinell hardness testers are suitable for testing very  wide range of materials. 
• From very soft material such as lead upto hard material like hardened steel, as well as thin  metal strips & case hardened jobs can be tested o these machines since the load applied is very small.
• These machines are available in various models like VB-50, VB-50-S, VB-120-S, VB-250 and  VB-250-S which are highly precise and easy to operate as well. 
• A push button system is provided for the selection of loads. 
• Loading cycle and penetration of the indentor in the job starts.
• Unloading is accomplished through handle and diagonal / diameter of impression directly  appears on the screen.
• A built in optical system with graduated readout with micrometer helps the Operator  to measure the impression directly on the projection screen. 
• This machine confirms to IS-1754-1986 for Vickers and IS-2281-1983, BS-240 for Brinell test.

 

Product Details:

Description:

• This Machine is used for measuring Brinell hardness of ferrous and non ferrous castings in foundries, engineering industries and material testing laboratory.
• It is used in forging and heat treatment plants for the measurement of hardness before and after heat treatment.This Machine conforms to IS : 2281 standard and has an accuracy within 1%.

Features:

• VERTEX make optical Brinell Hardness Testing machine is a production testing Machine.
• Operation of the machine is similar to the VB 3000.
• Swiveling mechanism of the ball indentor, Built-in optical systems with 14 x magnification & projection screen withmicrometer of least count 0.01 mm are the additional features of this machine.
• This helps the operator to measure the impression directly on the screen without moving the job.
• This machine confirms to IS : 2281 / 1983 and BS 240.

 

Product Details:

• The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The Greater the resistance of the concrete, greater is the rebounded impact. By reading this rebound impact on a scale and relating it to curves or table on graphs supplied with the instrument, the resistance to compression in MPA or PSI can be found.

Product Details:

Details:

• VERTEX make Rockwell hardness testers are suitable for checking hardness of metals and their alloys.
• Flat, Round as well as irregular types of components can be tested on these machines.
• These machines are designed & developed considering the component size to be tested on the machines as well as the load & scales to be used by the customer.
• These machines are manually operated, simple in design & easy to operate.
• Rockwell Hardness Testers are available in various models like VRS, VRS-150, VRB, VRB-250 & VSM.
• These models strictly confirm to IS : 1586 : 2000, BS : 891 part I & II, ASTM-E18 for Rockwell test andIS : 2281 : 1983, BS : 240, ASTM-E10 For Brinell test and IS : 1586 :2000, ESTM-E18 for Rockwellsuperficial Test.